|
MARINE BASE ENGINES
by
|
350 Chevy Base with Carb & Dist. added
|
| B181S-COMP
140hp/104kw *
|
COMPLETE
SERVICE BASE ENGINE
Includes: Service Base Engine
with 14" I/O (Reversible) Flywheel, Front Sump Oil Pan, Dipstick & Tube,
Circulating Water Pump, Harmonic Balancer, Electronic Distributor and
Coil. For Pre-1990 Engines. Exhaust Manifold Adapter #0993-181Z Is
Required.
One Year Limited Warranty
$2,146.00
|
| B4.3V-COMP
225hp/168kw *
VORTEC Style Cylinder Heads
|
COMPLETE
BASE ENGINE
Includes: Intake Manifold
for 4 BBL Spread Bore Carburetor, Circulating Water Pump, Harmonic
Balancer, 14" Flywheel (Forward Ring Gear for BM Starter),
Electronic Distributor & Coil, Cast Aluminum Oil Pan, Dipstick &
Tube. Must Use Electric Fuel Pump and Electric Choke Carburetor.
One Year Limited Warranty
$2,490.00
|
| B5.7V-COMP
310hp/235kw *
VORTEC Style Cylinder Heads
|
COMPLETE
SERVICE BASE ENGINE
Includes: Gen I Plus Engine
with High-Flow Cylinder Heads, 14" Inboard (Reversible) Flywheel,
Intake Manifold with brass insert (intake manifold has square bore
flange pattern with no heat crossover), Harmonic Balancer,
Steel oil pan, Valve Covers, Circulating Water Pump, Dipstick & Tube. Requires Electric Choke
Carburetor.
One Year Limited Warranty LH $2,970.00
Also Available As Opposite Rotation At Additional Cost
RH $3,670.00
|
B454S-COMP
330hp/246kw *
Also Available As Opposite Rotation
at Additional Cost |
COMPLETE
SERVICE BASE ENGINE - Gen
VI Engine with Roller Hydraulic Camshaft, One Piece Rear Seal and 4 Bolt
Mains. Replaces Mark IV, Gen V & Gen VI Big Block V-8's. - Includes:
14" Inboard (Reversible) Flywheel, Cast Iron Intake Manifold, Circulating
Water Pump, Steel oil pan, Valve Covers, Dipstick & Tube. Requires Electric Fuel Pump.
One Year Limited Warranty LH
$6,200.00
RH $6,725.00 |
|
Electric Fuel Pump Kit (for 350
& 454 GM Vortec) $240.00
All Base Engines Inbound Freight
$125.00
ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE |
|
|
