MAXIMUM RELIABILITY AND RUGGEDNESS
SIMPLICITY MARINE DRIVES are manufactured to the highest standards for increased reliability with superb materials  for the harsh underwater environment,   Stainless Steel, Manganese Bronze and Fiberglass composites. These superb materials also eliminate destructive electrolysis corrosion.

The hydro dynamically designed strut is cast in 316 Stainless Steel uses a conventional water lubricated bearing. The strut and stainless rudder are attached to the fiberglass drive housing. The water tight drive housing contains the steering systems, exhaust pipes and mufflers. The cover to the housing is finished in a non-skid for use as a swim platform.

With fewer moving higher quality components, Simplicity Marine Drives are virtually maintenance free.

 

SMD 200 sandshoe MINIMUM MAINTENANCE
With fewer moving higher quality components,
SIMPLICITY MARINE DRIVES are virtually Maintenance free.
NO! Power Stealing Right Angle Gear Changes!
NO! Boots or Bellows to Leak and Replace!
NO! Water Pumps in Drive Unit to Replace!
NO! Oil Seals or Hydraulic Trim Hoses to
        Leak Oil and Pollute the Environment!
and NO ALUMINUM TO CORRODE!

FM2a2 copy.JPG (17820 bytes)FM1b 2copy.JPG (19439 bytes)FM3a 200p copy.JPG (23691 bytes) 42' Passenger Ferry with    
SMD 485 Sandshoe Twin,
320 HP Daytona, ZF 280A, 2:1 ratio  26" X 28" 4 Blade Propellers

HIGHER SPEED AND INCREASED ECONOMY
This is done by reducing the drag of the water flowing through or over the underwater gear, which retards or slows the boat from slipping though the water. With Simplicity Marine Drives the water flows through only 50% to 60% of the propeller and rudder at planning speeds. This is known as SURFACE-PIERCING or VENTILATING THE BLADE TO THE SURFACE. Surface-piercing of the propeller reduces CAVITATION, (the power stealing air bubbles that form on the pressure side of the propeller blade). With Surface-Piercing design the propellers utilized are larger and are modified with more rack and cup to the blades. Larger propellers create more thrust, have less slippage and use less horsepower to obtain a given speed. This means increased speed and better economy across the whole rpm. range of the engine.

Back to Simplicity Marine Drives

 

Simplicity Marine Drives
 EnginesCrusader Marine PowerNanni Diesels - Toyota & KubotaPCMYanmar
 TransmissionsHurth - ZFTwin DiskVelvet Drive - Borg Warner
Steering & Control SystemsHydraflex UltaflexMomo
Contact UsHome Page


Simplicity Marine Products, Inc.
635 43rd St. Blvd. W.
Palmetto, FL 34221 U.S.A.
Phone (941) 722-8475
Fax (727) 499-7458

Created by Chuck Fowler
Updated: June 10, 2008

Made in the USA